Assembly Template / LED Flash demo code for PIC16F1829

Here’s an LED flash demo / code template for the PIC16F1829 chip (assembly language, naturally). This particular example uses the internal 32MHz oscillator but the config word selection definitions are included for reference when using other clocking methods.

For programming I bought a clone of the PICkit3 from Squirrel Labs (which came with a ZIF socket for non-ICSP programming)  and burnt the chip directly from MPLAB (v8.92… MPLAB X is.. ugh!)  I just had to ensure the option to provide VCC power to the device was ticked in the Programmer options and set jumpers on the ZIF board for the 20pin device.